Did you guys hear anything good about aeromotive a1000 fuel pump?
What else is good to use?
Did you guys hear anything good about aeromotive a1000 fuel pump?
What else is good to use?
When I was searching for my setup I kept hearing negative things about the A1000. Pretty much common consensus is 233 Walbro in take with a Bosh044 inline.Originally Posted by myAWDgst
Having installed the a few of these the things are SOOO LOUD it will drive you crazy!!!
they drown out the engine they are so loud, even if you rubber mount them its not much better,
I stuck with building a hangar on the stock fuel sender unit to hold two 255's and run a Y with two -6 to a single -8 for enough fuel to support 600 or so hp. and it was still very quiet
Plus those a1000's are $400
"Swilling NA beer and Leaded Fuel is my Hobbie"
I am getting married so you can have your Girlfriend back...
I know but i need it with 1600cc injectors and 42r...i can use cc close valve plug it's 12v(with DSM link)so i dont draw more curent from original fuel wire...Originally Posted by OldDirtyNoSeven
Also i made SS line from tank to engine and factory feed line is my return so i have planty of fuel flow...
It will work just fine, if you can get past the noise.
Or run two of those bosch pumps, if you plan on driving it around.
"Swilling NA beer and Leaded Fuel is my Hobbie"
I am getting married so you can have your Girlfriend back...
So bosch pumps are better?
They will last longer and will be more quiet
"Swilling NA beer and Leaded Fuel is my Hobbie"
I am getting married so you can have your Girlfriend back...
Thanks...who sell bosch pumps?