Results 1 to 5 of 5

Thread: *SMOG!!!* Logger/cable needed ASAP PLEASE!

  1. #1
    Sac DSM Member
    Join Date
    Jan 2006
    Posts
    371

    Default *SMOG!!!* Logger/cable needed ASAP PLEASE!

    Hey guys. It's about that time. I'm trying to get this thing smogged so I can go ahead and put my fuel mods back on. I'm always paranoid about driving this thing with this big turbo on it and no fuel mods behind it on the freeway. I'm trying to get it smogged by Thursday but first I'd like to log it to make sure my fuel trims are all static and at stock levels.

    Basically the car almost passed when I first got it from Manny. Back then it had a lot of miles on the engine/tranny. Some vacuum/boost leaks, a quick rigged vacuum line set up (done by me to pass visual) and somehow only failed the ppm sniffer test at idle I belive (may have been 2500, Ill need to check later) But now the cars basically new. Different block, brand spankin new head, new tranny, ALL vaccum lines are back to STOCK. (Jon basically stripped all the stock cars he had and put every last smog item back the way it shoulda been) So I'm quite confident I could simply pull in and pass now but I just wanna make sure and avoid wasting all the money I did last time attempting to smog it with out logging it.

    It still has the full turbo back Buschur exhaust and catback on it. It still has my V trim on it and of course it still has my 101200s. No other mods are on the car and considering the car is AWD and I only have to do a sniffer test at idle and 2500rpms the turbo wont even be boosting and wont really affect the numbers and the cams really don't do anything until upper RPMs as well so hopefully itll be good again this time.

    Another thing I'm doing this time is putting the stock MAS back on as well, so I'm upping my chances. It'd be nice if someone could help me log it (I don't have the cable nor software at the moment) or else someone let me borrow their cable for a couple hrs or maybe a day and I can get the software from Manny and log it with him.

    I'm almost sure that the car would definitely passs smog as it sits right now and I rather not have to stick my stock exhuast or my stock mani/turbo on if I dont have to. (I still have all that stuff)

    Please help a fellow DSMer out, hell if you help me log it we can run to a fastfood joint and grab a bite to eat while we log or after...

    Thanks in advance guys! :D

  2. #2
    Sac DSM Member
    Join Date
    Jan 2006
    Posts
    22

    Default

    I got a cable that u might want. Hopefully you need it for a 1g. asking 15 for it.

  3. #3
    Sac DSM Member
    Join Date
    Apr 2006
    Posts
    21

    Default

    i only have my obd2 logger man i'll ask around tho
    01 galant with a few modifications...

  4. #4
    Proven DSM Member
    Join Date
    Jan 2005
    Posts
    888

    Default

    Upon request, I've reopened this thread and both parties have agreed to squash it and play fair. Keep on topic this time or it gets relocked. No opinions on how to do what or assumptions on here-say, Josh is asking for a logger and if you have or know of one he can source to borrow, feel free to post.

    Thanks

    Manny

  5. #5
    Sac DSM Member
    Join Date
    Apr 2006
    Posts
    21

    Default

    i have the digital tuning logger for a sony clie sj22 if you can use that its cool i tried calling but got the machine mines a 408 number
    01 galant with a few modifications...

Similar Threads

  1. need help setting up logger
    By b00st33d in forum Newbie Section
    Replies: 0
    Last Post: September 20th, 2009, 05:44 PM
  2. 1G logger
    By tqmx1 in forum Tuning
    Replies: 9
    Last Post: June 8th, 2007, 12:34 PM
  3. Need to borrow someones 2g pocketlogger cable.
    By my3awds in forum Kickback & General Discussion
    Replies: 3
    Last Post: September 26th, 2006, 12:18 PM
  4. 6bolt turbo oil pan recommendation needed
    By Agent_LSD in forum General DSM Tech
    Replies: 9
    Last Post: September 6th, 2006, 12:40 PM
  5. Palm PDA Logger Q'
    By speedy13 in forum Newbie Section
    Replies: 4
    Last Post: May 27th, 2005, 06:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •