I just bought an electronic oil pressure gauge and the instructions say that i need to tap into the oil with the sender they gave me. does anyone konw a good spot to get it from? i got all the electric part hooked up i just need to find out where i can get the sender hooked up to. does anyone know? holla if you do 8) this is what the sender looks like.. the little end is the electric part and the big end is for the oil..
Results 1 to 8 of 8
Thread: Elec oil pressure gauge
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Bookmark in Technorati
- June 14th, 2005, 04:32 PM #1Sac DSM Member
- Join Date
- Mar 2005
- Posts
- 155
Elec oil pressure gauge
- June 14th, 2005, 05:51 PM #2Sac DSM Member
- Join Date
- Jan 2005
- Posts
- 123
There should be a plug on your oil filter housing. Just remove the plug and screw that in its place. That is if that fitting is the same size as the plug.
- June 14th, 2005, 05:59 PM #3Sac DSM Member
- Join Date
- Mar 2005
- Posts
- 155
i have a SS oil feed line to my turbo so that might have taken its spot.. hmm anywhere else?
- June 14th, 2005, 06:03 PM #4Proven DSM Member
- Join Date
- Jan 2005
- Posts
- 1,708
Your SS feedline took the place of the old feed line, the plugged hole should still be availible for use.
Originally Posted by Tomsheist
- June 14th, 2005, 07:05 PM #5Sac DSM Member
- Join Date
- Jan 2005
- Posts
- 213
you can also drill and tap the banjo bolt in your head that was used to feed the turbo. quite a few guys on nabr have done that.
- June 15th, 2005, 11:05 AM #6Sac DSM Member
- Join Date
- Mar 2005
- Posts
- 64
Re: Elec oil pressure gauge
[/quote]
Dude, you have longer nails than most women....
- June 15th, 2005, 01:04 PM #7Sac DSM Member
- Join Date
- Mar 2005
- Posts
- 479
you could always try where your OIl Pressure switch goes,you might need a few adaptors if you want to keep your oil light dough,but who needs that stinky ass light anyways,when it turns on,it's usually too late.
hi, I'm the idiot behind the wrench.
- June 15th, 2005, 05:36 PM #8Sac DSM Member
- Join Date
- Feb 2005
- Posts
- 1,535
If you remove your low oil pressure switch and install that big sender your oil filter might not screw on,
just install it where your old oil pressure gauge sender went....same 1/8npt thread count and everything, just use a little silicone sealant for a leakfree install."Swilling NA beer and Leaded Fuel is my Hobbie"
I am getting married so you can have your Girlfriend back...
Reply With QuoteSimilar Threads
-
No oil pressure
By dsmguy142 in forum Problem DiagnosticsReplies: 12Last Post: February 13th, 2008, 07:48 PM -
Anyone have a leakdown compressor gauge?
By my3awds in forum Kickback & General DiscussionReplies: 0Last Post: October 3rd, 2007, 10:43 AM -
Oil Pressure - Low to None please help
By jbGST in forum Problem DiagnosticsReplies: 15Last Post: June 4th, 2007, 06:34 PM -
plx wideband gauge
By turbocooker in forum General DSM TechReplies: 2Last Post: August 28th, 2006, 09:29 PM -
GAUGE INSTALL
By turbo_nic in forum General DSM TechReplies: 3Last Post: July 8th, 2005, 05:51 PM
